tube deburring machines
Use Of Tube Deburring Machines
Tube deburring machines are for removing the burrs and jagged edges caused by cutting operations on pipe and tubes. A burr is a raised edge remaining attached to a work piece after a modification process. A tube deburring machine can deburr not only round and square tube and pipe, but can also deburr extrusions and slash cut and mitered tube. Deburring a tube includes squaring the end of the tube concentric to the inner and outer edges of the tube. Deburring is the first step in tube preparation after the tube is cut. The chamfer should not exceed half the wall thickness of the tubing while deburring. Deburring is an essential step in any tube fabrication. The two common burrs for tube are hot formed burr, and cold formed burr. The hot formed bur is the most difficult to deburr. This burr is associated with abrasive saws. There is usually more material mass to this type of burr, which will deplete any deburring method. The worst part of the hot-formed burr is the heat. Usually, heated then cooled material is harder to deburr.
The tube does not rotate. A special application of wire brushes allows for the removal of burrs from tubes, rectangular shapes, oval shapes or irregular profiles in just a few seconds. Profiles of iron, steel, stainless steel, plastic and aluminum can be processed with the application of the proper brush for the material being processed. A special application of wire brushes allows for the deburring of tubes, rectangular shapes, oval shapes or irregular profiles in just a few seconds. Deburring extrusion profiles and extrusions of iron, steel, stainless steel, plastic and aluminum can be deburred with the application of the proper wire brush for the material being processed.
Deburring machines are used to smooth off the edges of tubings and pipes caused by most cutting procedures. Most tube deburring machines come with a set of wire brushes. Each of those brushes is suited for the different types of materials it can handle such as iron, stainless steel, plastic, and aluminum. Most can also handle round, oval, even some irregularly shaped tubes and pipes.
In most tube deburring, the process starts with squaring the end of the tube concentric to the inner and outer edges. Remember that the chamfer must not exceed half of the tube’s wall thickness during deburring. Tubes and pipes have two types of burrs: cold and hot formed burrs. Cold-formed burrs are the most convenient and easiest to deburr. However, hot-formed burrs are the hardest to remove. This is because they have more material mass. More mass can deplete the deburring process. Heated and then cooled burrs are even difficult to smooth off.
Tube deburring machines can be expensive. You can avail of tube deburring from companies that offer such services. They mostly combine cutting, bending, squaring and deburring processes. In this way, you can save more time and even money. Most services include – tube or pipe cutting, snap-tube cutting, steel tube cutting, metal tubing cut-off services, custom tube cut-off, volume metal cut-off, lathe-cut tubing and tube deburring.
